Rogers Super-Stoc AR15 Stock Review
When
I run across products which do not follow the same beaten path and
solve ongoing problems in an elegant way, I start clicking away on the
keyboard. What got me all excited was my picking up my new MMC - Mennie
Machine Company AR15 and finding a tight rock solid cam locking stock I
had never heard of before. What I found attached was the $75 Rogers
Super-Stoc which delivered something I had only seen before in stocks
priced well over $100 with a matched buffer tube… this was something
unique, a truly tight rattle free stock that would easily glide between
settings. I like it so much I picked one up for my Black Rain Ordnance
AR15 as well.
ABOUT ROGERS - BILL ROGERS
Bill Rogers is the the chief instructor at the Rogers Shooting School, is a former FBI Agent, police instructor, successful inventor, is well known in the shooting industry as an inventor and product engineer. He has been a world ranked IPSC shooter, a state trap champion, and has over 40 years of shooting competition experience. Bill has invented many of the holsters and equipment used by police and military worldwide, invented the target system and the method of instruction used at the school, and of course invented the Super-Stoc based on his vast experience and feedback from friends in the military, law enforcement, and competition community. I also learned of an awesome single point sling and gun cleaning Bore Squeeg-E system which DPMS now is also licensing for their kit, but those will be a different reviews.
FIT, FINISH, FEEL, FEATURES, & FUNCTIONS
The
fit and finish on the Rogers Super-Stoc is every bit as good as you
would find on Mission First, Magpul, or Mako however you will find extra
sling mounts, two integrated QD-sling mounts, and removable butt pad.
The stock itself is also lighter than most comparable stocks. The Rogers
Super-Stoc also is designed to survive a 3-foot drop with a fully
loaded weapon. Of note, some standard OEM stocks will not survive this
test. If you had ever had a stuck bolt and needed to jackhammer the
buttstock against the ground to free the bolt, you will like the
confidence that a strong stock design provides. 
The
significant features unique to the Super-Stoc design are the included
shims to allow the stock to fit smaller Mil-Spec and Larger Commercial
buffer tubes and all the other loosely spec’ed buffer tube variants.
Swap out the shim for a reasonably tight buffer to stock fit then the
cam-lock takes over the rest. The Roger Super-Stoc offers the unique
innovative adjustable cam-lock system which completely locks the stock
down tight to the buffer tube. This system totally eliminates any rattle
or wiggle and can even add strength to the overall stock/buffer tube
union. 
The
Cam-Lock system is very simple - pull up to lock the stock in place and
snap is back down to use the Quick-Release lever to change the stock
position. If you are lefty, you can even switch the cam lock to the
other side. I have tested and used a lot of stock and this is the ONLY
adjustable buttstock that does not rattle or wiggle. Most of the time I
either use a couple strips of electrical tape to take up the slop or
simply throw my hands in the air and buy a matching buffer tube and
stock set. The Rogers Super-Stoc skips that whole fiasco and delivers a
more stable shooting platform. Honestly I had about given up and moved
to Ace Stocks on my target rifles because of the added stability, but
now I am busily replacing every wiggly stock with a Roger’s Super-Stoc.
FINAL THOUGHTS
Bill
Rogers does a great job demonstrating his Super-Stoc in the below
video, however what impressed me was that for $75, his stock does
something no other stock does at any price, which is to deliver a
wiggle/rattle-free fit. After testing the stock on the MMC - Mennie
Machine Company AR15, I added one to my custom Black Rain Ordnance
custom Fallout-15 which was a huge improvement over the rattly OEM
Magpul stock. For $75 or maybe a little less out on the street, the
Roger’s stock in my opinion is the best adjustable stock you can put on
your AR15 period.
Roger’s Stock Product Video
SPECS
$75 Retail
Weight 7.3 oz,
SOURCES
Roger Products - http://prezine.com/rogers-products.html
1 comment:
I bought a Live Free Armory AR15 and it came with the rogers super stock.
When You remove the two screws and take off the butt pad, it has tabs
that perfectly fit the stock and even have an emblem that represents
the LF Armory Logo. That small stock pad with two screws has to come
off in order for Me to attach a "Slip On" pad I purchased from
Holster Ops. When I removed the original pad, I could not stand
how badly the Model 10019 looked once installed on My Rifle.
I was told that some people cut parts off of the 10019 to make it
look and fit better, but the ad made it sound like it was made especially for the Rogers Super Stock and after looking at the Limb Saver 10019, its just a universal slip on and was not made especially for My stock as I
had thought when I purchased it.
This is what the ad says:
"This Limbsaver Recoil Pad has been custom cut to fit the Rogers Super-Stoc®."
Note: When installed on the Rogers Super-Stoc® Deluxe removal of the existing stock recoil pad is necessary.
I do like the extra thickness and the way it reduces recoil, but
are there any non slip on butt stock pads that can actually come
with longer screws and actually look professional ?
Thank You for any help.
Mike
Post a Comment